Product Installation Instructions for 4Pcs Motorcycle Oil Suitable for CZD300 A, X-Max 300 (2017-2021), MWD300 (2020-2021)

Tools Required:

1. Wrench Set - To remove and tighten the oil drain plug.
2. Oil Filter Wrench - For removing and installing the oil filter.
3. Oil Catch Pan - To collect old oil when draining.
4. Funnel - To pour new oil into the engine without spilling.
5. Rags or Towels - For cleaning up spills and wiping tools.
6. Gloves - To keep your hands clean and protect from oil.
7. Jack or Stands (if necessary) - To elevate the motorcycle for better access.

Installation Steps:

1. Preparation: Ensure the motorcycle is on a stable surface. If needed, use a jack or stands to elevate the bike.

2. Drain Old Oil:

   • Position the oil catch pan under the engine.
   • Use the wrench to remove the oil drain plug and allow the old oil to completely drain into the pan.
   • Replace and tighten the drain plug once all oil has drained.

3. Replace the Oil Filter:

   • Use the oil filter wrench to remove the old oil filter.
   • Make sure to lubricate the rubber seal of the new oil filter with a little new oil.
   • Install the new oil filter by hand, tightening it securely (do not overtighten).

4. Add New Oil:

   • Place the funnel over the oil filler cap.
   • Carefully pour the new motorcycle oil into the engine, following the manufacturer’s specifications for oil capacity.

5. Check Oil Level:

   • Start the engine and let it run for a few minutes.
   • Turn off the engine and allow it to sit for a moment.
   • Use the dipstick to check the oil level and add more oil if necessary.

6. Clean Up:

   • Dispose of the old oil and filter in accordance with local regulations.
   • Clean any spills with rags or towels.

7. Final Check:

   • Make sure everything is securely tightened and no leaks are present.

By following these steps and using the required tools, you can efficiently and effectively change the oil in your motorcycle, ensuring optimal performance and engine protection.