Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Product Installation Instructions for Motorcycle Carburetor Elbow Tube Accessories
Compatibility:
Designed specifically for PWK 21-42MM and PHBG 17.5, 19, 21 motorcycle carburetors to ensure a perfect fit.
Installation Preparation:
Tools Needed:
- Screwdriver Set: A flat-head and Phillips screwdriver will be necessary for removing and tightening screws.
- Wrench Set: To loosen or tighten any nuts or bolts.
- Pliers: Helpful for gripping and securing any hoses or clamps.
- Socket Set: For additional leverage on stubborn bolts.
- Rag or Cloth: To wipe any excess fuel or dirt from the old carburetor.
- Safety Glasses: To protect your eyes during installation.
Installation Steps:
-
Preparation: Ensure the motorcycle is on a stable surface and turn off the fuel supply. Disconnect the battery for safety.
-
Remove the Old Elbow Tube: Use the screwdriver and wrench to remove the existing elbow tube from the carburetor. Be mindful of any fuel spill and clean up as needed.
-
Install the New Elbow Tube: Take the new Motorcycle Carburetor Elbow Tube accessory and align it properly with the intake of the carburetor.
-
Secure the Tube: Using the screwdriver and wrench, tighten all screws and clamps to secure the elbow tube in place. Ensure there are no loose fittings.
-
Reattach Any Disconnects: Reconnect any hoses or cables that were removed during the installation process. Double-check all connections for integrity.
-
Final Checks: Before starting the motorcycle, check that there are no leaks and that all components are secured properly.
-
Reconnect Battery and Fuel: Reattach the battery and turn on the fuel supply.
-
Test Run: Start the motorcycle and let it idle for a few minutes. Monitor the performance and listen for any unusual sounds.
Note: If you encounter any issues during installation, please consult a professional mechanic for assistance. Enjoy the enhanced performance and efficiency that the new elbow tube provides!
