Product Installation Instructions for Oil Filter Compatible with 420-956-123

Tools Needed:

1. Oil Filter Wrench
2. Socket Set (for removing the oil drain plug)
   3.Funnel
3. Oil Drain Pan
   5.Clean Cloth or Rag
4. Torque Wrench (if required by manufacturer)
5. Safety Gloves
6. Safety Goggles

Installation Steps:

1. Preparation:

   • Ensure the vehicle is parked on a level surface.
   • Turn off the engine and let it cool down completely.
   • Put on safety gloves and goggles for protection.

2. Lift the Vehicle:

   • If necessary, use a jack and jack stands to lift the vehicle to access the oil filter.

3. Drain the Oil:

   • Place an oil drain pan under the oil drain plug.
   • Remove the drain plug using the socket set and allow the old oil to drain completely.

4. Remove the Old Oil Filter:

   • Use the oil filter wrench to loosen and remove the old oil filter.
   • Inspect the old filter's rubber O-ring to ensure it was removed as well.

5. Prepare the New Oil Filter:

   • Apply a small amount of new engine oil to the rubber O-ring of the new oil filter. This helps ensure a good seal.

6. Install the New Oil Filter:

   • Screw the new oil filter onto the engine by hand, ensuring it is snug. Do not over-tighten.

7. Reinstall the Drain Plug:

   • Once the oil has fully drained, reinstall the drain plug using the socket set and tighten it securely.

8. Add New Oil:

   • Using a funnel, add the appropriate amount of new engine oil through the oil fill cap. Refer to your vehicle's manual for the correct oil capacity.

9. Check for Leaks:

   • Start the engine and let it run for a few minutes. Check around the new oil filter and drain plug for any leaks.

10. Dispose of Old Oil and Filter:

    • Properly dispose of the old oil and filter at a recycling center or an auto parts store that accepts used oil.

Final Check:

• Make sure all tools are removed from under the vehicle before lowering it back to the ground.
• Regular maintenance, including oil and filter changes, will ensure optimal performance of your engine.

Thank you for using the Oil Filter Compatible with 420-956-123. Enjoy your drive!