Product Installation Instructions for 2Pcs Replacement Landing Gear for K110 K110S V977 RC Helicopter

Tools Required:

1. Screwdriver (appropriate size to fit the screws on your helicopter)
2. Optional: Pliers (for gripping small components if necessary)

Installation Steps:

1. Preparation:

   • Ensure that your RC helicopter is powered off and has cooled down if it was recently in use.
   • Gather all tools mentioned above in a clean, well-lit area to facilitate the installation process.

2. Remove Old Landing Gear:

   • Using the screwdriver, remove the screws securing the old landing gear to the helicopter body. Keep the screws in a safe place for reinstallation if needed.
   • Gently detach the old landing gear from the helicopter, taking care to avoid damaging any other components.

3. Install New Landing Gear:

   • Align the new replacement landing gear with the mounting points on the helicopter.
   • Carefully press the new landing gear into place, ensuring that it fits snugly and is properly aligned.

4. Secure the Landing Gear:

   • Using the screwdriver, insert and tighten the screws to secure the new landing gear. Ensure that they are firmly in place but do not overtighten to avoid damaging the components.

5. Final Inspection:

   • Inspect the installed landing gear to confirm it is secure and properly aligned.
   • Make sure there are no loose parts or obstructions around the landing gear.

6. Test Flight:

   • Power on your RC helicopter and conduct a test flight in a safe area to ensure that the new landing gear provides the desired stability and performance.

Additional Notes:

• If you encounter any issues during installation or if the new landing gear does not fit as expected, consult the instruction manual for your specific helicopter model or seek assistance from experienced RC hobbyists.
• Enjoy your enhanced flying experience with the upgraded landing gear!