Product Installation Instructions for Compatible Black Drum Unit AAV70RD DR-316K for Konica Minolta Bizhub C250i C300i C360i Printer

Tools Required:

• No special tools required
• Clean, lint-free cloth (optional, for cleaning)
• Gloves (optional, to avoid fingerprints)

Installation Steps:

1. Preparation:

   • Ensure the printer is powered off and unplugged from the power source to prevent any electrical hazards during installation.
   • Gather all the materials needed, including the Compatible Black Drum Unit AAV70RD DR-316K, and if desired, a clean cloth and gloves.

2. Remove the Old Drum Unit:

   • Open the printer's front cover gently.
   • Locate the current drum unit and carefully pull it out of the printer.
   • If there is any remaining toner or dust, use a clean, lint-free cloth to wipe the area around the drum slot.

3. Unpack the New Drum Unit:

   • Remove the Compatible Black Drum Unit AAV70RD DR-316K from its packaging, ensuring not to touch the surface of the drum to prevent damage.
   • Remove any protective covers or seals from the new drum unit.

4. Install the New Drum Unit:

   • Align the new drum unit with the slot inside the printer.
   • Carefully slide the drum unit into place until it clicks or snaps securely. Ensure that it is properly seated.

5. Finishing Up:

   • Close the printer’s front cover securely.
   • Plug the printer back into the power source and turn it on.

6. Test the Installation:

   • Print a test page to verify that the new drum unit is functioning correctly and providing optimal print quality.

Note: Always refer to your printer's user manual for specific instructions regarding your model if needed. Enjoy high-quality printing with your new drum unit!