Installation Instructions for Inner Float Copper Retro Case for Carburetor CJ-K750

Compatibility:
This retro case is suitable for various models including CJ-K750, R50, R1, R12, and R71 carburetors.

Product Features:

• Precise design ensures better sealing and durability.
• Easy installation without the need for special tools.
• Optimized for improved fuel-air mixture, enhancing engine power output.
• Provides a cost-effective solution for repairs and upgrades, adding a vintage style to your motorcycle.

Tools Required:
Before starting the installation, please ensure you have the following tools ready:

1. Flathead Screwdriver - For removing screws and securing parts.
2. Phillips Screwdriver - If your carburetor uses Phillips screws.
3. Socket Wrench Set - To loosen and tighten nuts on the carburetor.
4. Pliers - For gripping and cutting tasks if necessary.
5. Adjustable Wrench - To adjust fittings as needed.
6. Clean Cloth - For cleaning the carburetor and surrounding areas before installation.
7. Safety Goggles - To protect your eyes during the installation process.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is turned off and parked on a stable surface.
   • Disconnect the battery to prevent any electrical issues during installation.
   • Use the clean cloth to wipe down the carburetor area to prevent debris from entering during the process.

2. Remove the Old Carburetor Case:

   • Use the appropriate screwdriver to remove any screws holding the old case in place.
   • Carefully detach the old case from the carburetor assembly.

3. Install the Inner Float Copper Retro Case:

   • Position the new retro case over the carburetor.
   • Ensure that it aligns correctly with the mounting points.
   • Secure it in place by tightening the screws or bolts with your socket wrench or screwdrivers.

4. Check Sealing and Generate Airflow:

   • Make sure the sealing is tight and there are no gaps.
   • Adjust fittings with the adjustable wrench if necessary to ensure optimal airflow.

5. Reattach the Battery:

   • Once the installation is complete, reconnect the battery.

6. Test the Motorcycle:

   • Start the engine and check for any leaks or irregularities in performance.
   • Ensure everything is functioning correctly and enjoy the enhanced performance!

Thank you for choosing the Inner Float Copper Retro Case for your carburetor needs. Happy riding!