Installation Instructions for Fuel Cock Petcock Valve Tank Switch

Compatible Models:

• CBR600 F2
• CBR600 F3
  -CBR600F
• CBR250 MC22
  -CBR250R
  -CBR919

Tools Required:

1. Flathead Screwdriver - for loosening and tightening screws.
2. Phillips Head Screwdriver - for loosening and tightening screws, if applicable.
3. Wrench Set - for removing any bolts or nuts that may be securing the fuel valve.
4. Pliers - for gripping and pulling hoses, if needed.
5. Rags or Towels - to clean up any spilled fuel during installation.
6. Fuel Container - to catch fuel during the removal of the old valve.
7. Safety Goggles - to protect your eyes during the installation process.
8. Gloves - to protect your hands from fuel and grime.

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is on a stable surface.
   • Turn off the fuel supply and prepare a fuel container to catch any spilled gasoline.

2. Remove the Old Valve:

   • Use appropriate screwdrivers and wrenches to disconnect and remove the old petcock valve from the fuel tank.
   • Carefully detach fuel lines and any other connections.

3. Clean the Area:

   • Clean the area around the mounting point to remove any debris or residue.

4. Install the New Fuel Valve:

   • Align the new Fuel Cock Petcock Valve into position.
   • Attach the fuel lines and secure them ensuring there are no leaks.

5. Secure the Valve:

   • Use the appropriate tools to tighten all screws and bolts securely but avoid overtightening.

6. Check for Leaks:

   • Turn on the fuel supply and check for any leaks.
   • If there are no leaks, proceed to the next step.

7. Test the Motorcycle:

   • Start the engine and allow it to run for a few minutes to ensure stable performance.
   • Check again for any leaks during operation.

8. Final Checks:

   • Once confirmed that everything is functioning properly, clean up any spilled fuel and properly dispose of any waste.

Conclusion:
With the right tools and following these steps, you should be able to easily install the Fuel Cock Petcock Valve Tank Switch, ensuring a reliable fuel flow for your motorcycle. Please read the installation manual carefully for any model-specific instructions. Always prioritize safety during the installation process.