Product Installation Instructions for Mavic Air Camera Repair Part Motor Housing PTZ Transmission Flex Flat Ribbon Lens Glass Replacement

Tools Required:

1. Screwdriver Set: A precision screwdriver set, including Phillips and flat-head screwdrivers, to remove and secure screws.
2. Tweezers: To handle small components and connectors with care.
3. Plastic Pry Tools: To gently open the drone's casing without damaging it.
4. Soldering Iron (optional): For advanced users, a soldering iron may be needed if any wiring connections require resoldering.
5. Clean Cloth: To clean the lens glass and ensure no dust or debris obstructs the camera.
6. Anti-static Wrist Strap (optional): To prevent static damage to sensitive electronic components.

Installation Steps:

1. Power Off the Drone: Ensure the drone is completely powered off and remove the battery.

2. Remove the Old Components:

   • Use the screwdriver to remove screws securing the motor housing.
   • Gently use the plastic pry tools to detach the casing without causing damage.
   • Carefully disconnect any wiring or flex ribbon associated with the motor housing.

3. Install the New Motor Housing:

   • Align the new motor housing with the designated mounting points.
   • Carefully secure any wiring or flex ribbon, ensuring all connections are proper.
   • Use the screwdriver to fasten screws tightly but do not overtighten to avoid stripping the screws.

4. Replace the Lens Glass:

   • Clean the area where the lens glass will be placed with a clean cloth.
   • Gently remove the protective film from the new lens glass.
     -Align and secure the lens glass in place, ensuring it fits snugly.

5. Reassemble the Drone:

   • Replace the drone casing, ensuring all clips and connectors are properly aligned.
   • Reattach all screws to secure the casing, ensuring not to overtighten.

6. Final Checks:

   • Double-check all connections and screws.
   • Power on the drone to ensure the new components are functioning correctly.

7. Testing:

   • Take the drone for a test flight to ensure everything is operating smoothly and to check if the camera quality is optimal.

Notes:
Always refer to your drone's manual for specific instructions related to your model. If you encounter any issues during installation, consult a professional technician for assistance.