Installation Instructions for Air Filter and Fuel Filter Line Hose Kit

Compatible Models:

• MS180
  -MS170
• 018
• 017

Required Tools:

• Screwdriver (Phillips or flathead, depending on the screws used)
  -Pliers
• A clean cloth or rag (for cleaning surfaces)
• Safety gloves (to protect your hands)
• Safety goggles (to protect your eyes)

Installation Steps:

1. Preparation:

   • Ensure the chainsaw is turned off and cooled down.
   • Disconnect the spark plug wire to prevent accidental starting.
   • Clean the area around the air filter and fuel filter to avoid debris entering the engine.

2. Remove the Old Filters:

   • Locate the air filter cover and use the appropriate screwdriver to remove the screws.
   • Carefully take out the old air filter.
   • Next, locate the fuel filter, usually found within the fuel tank. Remove it by using pliers if necessary.

3. Install the New Filters:

   • Place the new air filter into the designated area, ensuring it fits snugly.
   • Insert the new fuel filter into the fuel tank, ensuring it is securely in place.

4. Reconnect Hoses:

   • Ensure that all hoses are properly connected to maintain fuel flow. Verify that there are no leaks.

5. Reattach Air Filter Cover:

   • Replace the air filter cover and secure it with the screws removed earlier.

6. Final Checks:

   • Reconnect the spark plug wire.
   • Check all connections one last time to ensure everything is secure.

7. Test the Chainsaw:

   • Start the chainsaw and ensure it is running smoothly. If there are any issues, double-check your connections.

Maintenance Tips:

• Regularly check and replace the air and fuel filters to maintain optimal chainsaw performance.
• Keep the area around the filters clean to prevent dirt and debris from entering the engine.

By following these instructions, you can easily install the Air Filter and Fuel Filter Line Hose Kit for your compatible chainsaw model, ensuring enhanced performance and longevity of your equipment.