Product Installation Guide for 3PCS LED Backlight Strips

Compatibility:

This LED backlight strip is compatible with various TV models, including LED39N2600, HLE3917RTF, H39N2110, 39H5D, HD390N2FS2-TXQL, JHD390N2F51-BKQL, S5, BBY, FM, ROH, JL, and D39081330-003CS-M 1175293.

Tools Required:

To install the LED backlight strips, you will need the following tools:

1. Screwdriver (Philips or Flathead, depending on your TV model)
2. Scissors (for cutting the strip to the desired length, if necessary)
3. Measuring Tape (to measure the length of the TV for accurate placement)
4. Cleaning Cloth (to clean the surface before installation)
5. Adhesive Tape or Glue (if additional adhesive is needed)

Installation Steps:

1. Preparation:

   • Ensure your TV is powered off and unplugged.
   • Clean the area where the LED strips will be applied with a cleaning cloth to ensure good adhesion.

2. Measure and Cut:

   • Use the measuring tape to determine the required length of the LED strip.
   • If necessary, use scissors to cut the strip to the appropriate length, following the marked cutting lines.

3. Attach the LED Strips:

   • Peel off the adhesive backing on the LED strip.
   • Carefully apply the strip along the desired edges of the TV, ensuring it is properly aligned.

4. Connect the Power Source:

   • Follow the provided instructions to connect the LED strips to the power source, ensuring correct polarity.

5. Test the Installation:

   • Plug in your TV and turn it on to check if the LED backlight strips are functioning correctly.

6. Final Adjustments:

   • If needed, make any final adjustments to the positioning of the LED strips for optimal visual effect.

Note:

Always refer to the specific instructions provided with your LED backlight strips for any additional details or precautions.