Installation Instructions for Compatible Front and Rear Brake Pads for AN250 AN400 Models (1998-2006)

Tools Required:

1. Socket wrench set
2. Torque wrench
3. Screwdriver (flathead and Phillips)
4. Pliers
5. Brake cleaner
   6.Clean rag or cloth
6. Safety goggles
   8.Gloves

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is parked on a stable surface and the engine is turned off.
   • Wear safety goggles and gloves for protection during the installation process.

2. Remove the Wheels:

   • Use the socket wrench to loosen and remove the wheel nuts.
   • Remove the front or rear wheel carefully and set it aside on a clean surface.

3. Accessing the Brake Calipers:

   • Locate the brake calipers next to the wheel.
   • Use the screwdriver to remove the caliper mounting bolts.
   • Carefully detach the brake caliper from its mounting bracket without pulling the brake line.

4. Remove Old Brake Pads:

   • Gently slide out the old brake pads from the caliper.
   • Inspect the caliper and the piston for any damage or debris. Clean with brake cleaner and a rag if necessary.

5. Install New Brake Pads:

   • Insert the new brake pads into the caliper, ensuring they are properly aligned.
   • Check that the pads fit snugly in place without any obstruction.

6. Reattach the Brake Caliper:

   • Carefully place the brake caliper back onto its mounting bracket.
   • Use the socket wrench to securely tighten the caliper bolts to the manufacturer's recommended torque specification.

7. Reattach the Wheel:
   -Align the wheel with the axle and carefully place it back onto the motorcycle.

   • Use the socket wrench to tighten the wheel nuts securely.

8. Final Checks:

   • Pump the brake lever a few times to ensure the new pads are seated properly.
   • Check for any unusual noises when testing the brakes.

9. Dispose of Old Brake Pads:

   • Dispose of the old brake pads responsibly according to local regulations.

Note: Always consult the manufacturer's manual for specific details related to your motorcycle model before starting the installation process. If you feel uncertain about any step, consider seeking assistance from a professional mechanic.

Enjoy your improved brake performance and safe riding experience!