Universal Fuel Shut-off Valve Switch Installation Instructions

Product Compatibility:
This universal fuel shut-off valve switch is designed for 49cc 2-stroke motorcycles, ATVs, quads, and dirt bikes.

Tools Required:

1. Flathead screwdriver
2. Phillips screwdriver
3. Adjustable wrench or pliers
   4.Clean rag or cloth
4. Safety goggles (recommended)

Installation Steps:

1. Preparation:

   • Ensure that the vehicle is parked on a flat surface and the engine is turned off. Allow the engine to cool down completely.
   • Wear safety goggles to protect your eyes from any fuel spills during the installation.

2. Locate the Fuel Line:

   • Identify the fuel line connecting the fuel tank to the carburetor. Follow the line from the tank to find a convenient point for installation.

3. Disconnect the Fuel Line:

   • Use the adjustable wrench or pliers to loosen the clamps holding the fuel line in place.
   • Carefully slide the clamps away and disconnect the fuel line from the carburetor, allowing any fuel to drain into a clean rag or cloth.

4. Install the Fuel Shut-off Valve:

   • Attach one end of the fuel line to the input side of the fuel shut-off valve. Ensure it is secured tightly with the clamp.
   • Connect the output side of the fuel shut-off valve to the carburetor. Again, secure the connection with the clamp.

5. Check for Leaks:

   • After installation, turn the fuel supply on and inspect all connections for leaks. If you notice any leaks, make sure the clamps are tightened properly.

6. Finalize Installation:

   • Ensure the fuel shut-off valve is in the ‘off’ position when not in use for added safety.
   • Recheck all components to ensure that everything is secure.

7. Test the System:

   • Start the vehicle and observe the fuel flow. The shut-off valve should operate smoothly without any fuel leaks.

Conclusion:
Follow these instructions carefully for a successful installation of your Universal Fuel Shut-off Valve Switch, ensuring safety and effective fuel management for your vehicle. If you have any issues or concerns during installation, consult a professional mechanic.