Product Installation Instructions for the Universal 38MM Chrome Plastic Air Filter

Tools Required:

1. Adjustable Wrench
2. Screwdriver (appropriate type based on your vehicle's screws)
   3.Cleaner Cloth
3. Hose Clamp (if not included with the air filter)
4. Safety Glasses (recommended)

Installation Steps:

1. Preparation:

   • Before starting, make sure your vehicle is turned off and has cooled down.
   • Gather all necessary tools and materials.

2. Remove the Old Air Filter:

   • Locate the existing air filter on your mini bike.
   • Use the screwdriver to loosen any screws or fasteners holding the old air filter in place.
   • Carefully remove the old air filter and clean the surrounding area with a cleaner cloth to remove any dirt or debris.

3. Prepare the New Air Filter:

   • Take the Universal 38MM Chrome Plastic Air Filter out of the packaging.
   • If your filter comes with an adjustable interface, adjust it to fit the 38MM intake manifold of your vehicle.

4. Install the New Air Filter:

   • Position the new air filter onto the intake manifold of your mini bike.
   • If a hose clamp is necessary, ensure it is securely placed around the filter to keep it in position.

5. Tighten and Secure:

   • Use the adjustable wrench to tighten any clamps or fittings that hold the filter in place.
   • Ensure everything is securely fastened to prevent any air leaks.

6. Final Checks:

   • Double-check all connections and fittings.
   • Start your mini bike to test the installation. Listen for any unusual sounds which may indicate improper installation.

7. Enjoy Enhanced Performance:

   • Once everything is confirmed in order, enjoy the improved performance and efficiency provided by your new air filter.

Safety Note:
Always wear safety glasses during installation to protect your eyes from debris and accidental contact with sharp objects.

If you encounter any difficulties during installation, consult a professional mechanic for assistance. Enjoy your ride!