Product Installation Instructions for Universal Tubeless Tire Valve Stem

Tools Required:

1. Adjustable Wrench - To tighten the valve stem securely.
2. Tire Lever - For removing the tire if necessary.
3. Air Pump - To inflate the tire to the desired pressure once installed.
4. Tire Pressure Gauge - To check the tire pressure after installation.
5. Clean Cloth - To wipe the valve area before installation.
6. Safety Goggles - To protect your eyes during the process.

Installation Steps:

1. Prepare the Area:

   • Ensure you are working in a clean, dry area with enough space to maneuver around your vehicle.

2. Remove the Old Valve Stem (if applicable):

   • Use the tire lever to carefully remove the tire from the rim if you are replacing an old valve stem.
   • Locate the old valve stem and use an adjustable wrench to remove it.

3. Clean the Valve Area:

   • Wipe the area around the valve hole with a clean cloth to remove any dirt or debris.

4. Select the Angle:

   • Choose the appropriate valve stem angle (straight, 90 degrees, or 135 degrees) based on your vehicle and the available space.

5. Install the New Valve Stem:

   • Insert the new valve stem into the valve hole of the rim. Ensure it fits snugly.
   • Use an adjustable wrench to tighten the valve stem securely. Be careful not to overtighten, which could damage the rubber.

6. Reinstall the Tire:

   • If the tire was removed, carefully fit the tire back onto the rim, ensuring that it sits evenly.

7. Inflate the Tire:

   • Use an air pump to inflate the tire to the manufacturer's recommended pressure.
   • Keep checking the pressure with a pressure gauge to ensure it is correct.

8. Check for Leaks:

   • After installation, spray a soapy water solution around the valve stem to check for air leaks. Bubbles will form if there is a leak.

9. Final Inspection:

   • Ensure everything is tightly secured and that the tire is properly seated on the rim.

Safety Tips:

• Always wear safety goggles to protect your eyes from debris.
• Ensure the vehicle is stable and secure before starting the installation.

By following these steps and using the required tools, you will be able to install your Universal Tubeless Tire Valve Stem effectively. Enjoy your enhanced driving experience with improved safety!