Installation Instructions for 12 Ultra Bright Flashing Strobe Lights Kit for 1/10 1/8 RC Drift Cars and 4WD Models

Tools Needed:

1. Screwdriver Set: A set of small screwdrivers (both Phillips and flathead) to secure the lights to your RC vehicle.
2. Wire Cutters/Strippers: To trim any excess wire if needed and ensure clean connections.
3. Electrical Tape or Heat Shrink Tubing: For securing connections and preventing short circuits.
4. Hot Glue Gun or Double-Sided Tape: To attach the lights securely to the body of your RC car.
5. Optional - Soldering Iron: For more permanent wire connections if required.

Installation Steps:

1. Prepare Your RC Vehicle:

   • Ensure your RC car is powered off and disconnected from any power source.
   • Clean the surface area where you plan to attach the lights to ensure good adhesion.

2. Identify Locations for Lights:

   • Choose the appropriate positions on your RC vehicle for the strobe lights. Common areas include the front bumper, rear, and roof.

3. Attach the Lights:

   • Use hot glue or double-sided tape to adhere the lights to the chosen locations. Ensure they are positioned securely and are visible.

4. Connect the Wires:

   • Carefully route the wiring to avoid any moving parts.
   • If needed, use wire cutters to trim any excess wire.
   • Strip the ends of the wires for proper connection.

5. Secure the Connections:

   • Use electrical tape or heat shrink tubing to wrap around any exposed wire connections.
   • If using a soldering iron, solder the connections for a reliable setup.

6. Connect to Power Source:

   • Identify the battery or power source of your RC vehicle.
   • Follow the instructions for connecting the strobe light kit to the power source, ensuring correct polarity.

7. Testing:

   • Power on your RC vehicle and check the strobe lights.
   • Test different flashing modes as per the kit’s features.

8. Final Adjustments:

   • Make any necessary adjustments to the positioning of the lights if needed.
   • Ensure all wiring is secured and will not interfere with the operation of the vehicle.

Your strobe light kit is now installed and ready to enhance your RC vehicle's nighttime performance! Enjoy your enhanced driving experience!