Product Installation Instructions for Compatible Ignition Coil

Tools Required:

1. Screwdrivers:

   • A flathead screwdriver
   • A Phillips screwdriver

2. Wrenches or Socket Set:

   • A set of wrenches or socket sizes compatible with the equipment bolts.

3. Pliers:

   • Needle-nose pliers or regular pliers for handling small components.

4. Torque Wrench:

   • To ensure bolts are tightened to the manufacturer’s specifications.

5. Wire Cutters/Strippers:

   • If any wiring needs to be cut or stripped during installation.

6. Safety Gear:

   • Safety goggles to protect your eyes.
   • Gloves to protect your hands.

Installation Steps:

1. Safety First: Turn off the equipment and disconnect the battery to prevent any electrical shocks during the installation.

2. Remove the Old Ignition Coil:

   • Locate and remove any screws or bolts securing the old ignition coil.
   • Use the screwdriver or wrench to remove the fasteners, then gently pull the ignition coil free.

3. Disconnect Wiring:

   • Carefully disconnect the wiring harness from the old ignition coil. Use wire cutters if necessary to assist with any tight connections.

4. Install the New Ignition Coil:

   • Connect the wiring harness to the new ignition coil. Ensure all connections are secure.
   • Position the new ignition coil in the same location as the old one.

5. Secure the Ignition Coil:

   • Use the previously removed screws or bolts to secure the new ignition coil in place. A torque wrench may be used to tighten the fasteners to the correct specifications.

6. Reconnect the Battery:

   • Once the ignition coil is securely installed, reconnect the battery.

7. Test the Equipment:

   • Start the equipment to test the new ignition coil. Ensure it runs smoothly without any issues.

8. Final Check:

   • After a short period of operation, recheck the connections and bolts to ensure everything remains tight and secure.

By following these instructions and using the appropriate tools, you can successfully install the Compatible Ignition Coil for your equipment, ensuring optimal performance and reliability.