Product Installation Instructions for Gas Fuel Tap Valve Switch Pump

Compatible Models: GT250, GT250R (2002-2009), GT650, GT650R, GV650, GT 250, 650, 250R, 650R (2005-2008)

Tools Required:

1. Basic Hand Tools:

   • Phillips screwdriver
   • Flathead screwdriver
   • Adjustable wrench
     -Pliers

2. Optional Tools:

   • Torque wrench (for precise fittings)
   • Ratchet and socket set

3. Safety Gear:

   • Safety goggles
   • Gloves

Installation Steps:

1. Preparation:

   • Ensure the motorcycle is on a stable surface.
   • Turn off the fuel supply and disconnect the battery.

2. Remove the Old Fuel Tap:

   • Use the screwdriver to remove any screws securing the old fuel tap valve.
   • Carefully detach the fuel lines from the old valve, utilizing the adjustable wrench if needed.

3. Install the New Fuel Tap Valve Switch Pump:

   • Align the new fuel tap valve with the mounting holes.
   • Secure it in place using the screws previously removed; ensure it’s fitted snugly.

4. Connect the Fuel Lines:

   • Attach the fuel lines to the new valve, ensuring a tight fit to prevent leaks.

5. Reinstall Any Removed Components:

   • If you removed any additional components for better access, reinstall them as necessary.

6. Testing:

   • Reconnect the battery.
   • Turn on the fuel supply and check for leaks around the connections.
   • Start the engine and observe its performance to ensure everything is functioning correctly.

Final Check:

• Confirm that all tools have been removed from the workspace and dispose of any waste materials properly.

By following these steps, you can easily install the Gas Fuel Tap Valve Switch Pump and improve your motorcycle’s fuel management efficiency. Enjoy your ride!