Product Installation Instructions for RC On-Road Racing Car 1/10 Scale Sponge Tires and Wheel Rims

Included Components:

• 1 set of 1/10 scale sponge tires with wheel rims

Tools Required:

1. 2.0mm Hex Driver – for removing and installing wheel nuts.
2. Wheel Nut Wrench – to ensure a secure fit of the wheel nuts.
3. Tire Changing Tool (optional) – for easier tire installation and removal.
4. Spray Lubricant (optional) – for reducing friction and making the installation smoother.

Installation Steps:

1. Preparation:

   • Ensure your RC car is turned off.
   • Gather all the required tools and components.

2. Removing Old Tires:

   • Using the 2.0mm hex driver, remove the wheel nuts by turning them counterclockwise.
   • Carefully detach the old tires from the wheel rims.

3. Installing New Tires:

   • Align the new sponge tires with the wheel rims, ensuring they fit snugly.
   • Press the tires onto the rims until they are securely attached.

4. Attaching Wheel Rims:

   • Align the wheel rims with the 12mm hex interface on your RC car's wheel hubs.
   • Slide the rim onto the hub, ensuring it is flush against the surface.

5. Securing the Wheel Nuts:

   • Place the wheel nuts onto the threaded axles.
   • Use the wheel nut wrench to tighten the nuts securely, turning them clockwise. Be careful not to overtighten.

6. Final Checks:

   • Ensure all tires are properly secured and aligned.
   • Spin each wheel to make sure they rotate freely without obstruction.

7. Testing:

   • Once installed, turn on your RC car and test drive it in a safe environment to ensure functionality and performance.

Important Notes:

• Always check that your tires are in good condition before each use.
• Regularly inspect and maintain the installation for optimal performance.

Enjoy your enhanced driving experience with the new RC On-Road Racing Car tires!