
Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !




Product Installation Instructions for Replacement Projection Lamp Compatible with 5J J0705 001 3325 MP670 W600
Tools Required:
Installation Steps:
Power Off the Projector:
Ensure the projector is turned off and unplugged from the power source. This is important for your safety and to prevent damage to the device.
Let It Cool Down:
If the projector has been in use, allow it to cool down completely for at least 30 minutes.
Prepare the Work Area:
Lay a soft cloth or microfiber cloth on a flat surface. This will provide a protective surface to prevent scratches on the projector.
Access the Lamp Compartment:
Use the screwdriver to remove any screws holding the lamp compartment cover in place. Carefully set the screws aside in a safe location.
Remove the Old Lamp:
Gently pull the old lamp out of the compartment. If it feels stuck, ensure that you have removed all screws before pulling.
Clean the Lamp Compartment:
Use a soft cloth or cleaning solution to clean the lamp compartment if necessary. Avoid touching the interior parts with your fingers.
Install the New Lamp:
Take the new replacement lamp and insert it into the compartment, ensuring it fits snugly in place.
Secure the Lamp Compartment Cover:
Reattach the lamp compartment cover and use the screwdriver to secure it with the screws you set aside earlier.
Power On the Projector:
Plug the projector back into the power source and turn it on. Check to ensure that the new lamp is functioning correctly.
Dispose of the Old Lamp:
Follow your local regulations for the proper disposal of the old lamp.
Note: Always handle the lamp with care to avoid damage, and consult the projector's user manual for any specific instructions related to your model.
Thank you for choosing our Replacement Projection Lamp! Enjoy your improved viewing experience!