
Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !





Product Installation Instructions for Replacement Bulb for 58mm R17 350W Moving Beam Stage Light
Tools Required:
Installation Steps:
Power Off:
Ensure that the stage light is turned off and unplugged from the power source to prevent any electrical hazards.
Remove the Housing:
Use a Phillips screwdriver to remove the screws securing the light fixture's housing. Carefully lift the housing away to access the bulb compartment.
Remove the Old Bulb:
Gently rotate the old bulb counterclockwise to detach it from its socket. If the bulb is stuck, use a flathead screwdriver to lightly pry it loose, being cautious not to damage the socket.
Prepare the New Bulb:
Take the new 58mm R17 350W bulb out of its packaging. If desired, use a soft cloth or gloves to handle it, avoiding direct contact with your fingers.
Install the New Bulb:
Align the base of the new bulb with the socket and carefully insert it. Turn the bulb clockwise until it is securely in place.
Reattach the Housing:
Position the housing back onto the light fixture and secure it with the screws you removed earlier using the Phillips screwdriver.
Test the Installation:
Plug the stage light back into the power source and turn it on. Check to ensure that the new bulb is functioning properly and providing the desired light output.
Final Check:
Inspect the installation for any loose screws or connections. Ensure that everything is securely fastened and that there are no exposed wires.
Safety Precautions:
By following these instructions, you can easily and safely replace the bulb in your 58mm R17 350W Moving Beam Stage Light, restoring its performance for your stage events.