Installation Instructions for Metal Rear Bumper with Spare Tire Holder and Light for 1/10 Scale RC Crawler Defender D110

Product Overview:
This durable metal rear bumper is specifically designed for 1/10 scale RC crawlers, providing strong compatibility and functionality. The bumper includes a spare tire holder and integrated lighting for enhanced off-road capabilities and safety during nighttime driving.

Tools Required:
To install the Metal Rear Bumper, you will need the following tools:

1. Screwdriver Set: A Phillips and flathead screwdriver will be necessary to secure screws.
2. Wrench Set: Adjustable wrenches or pliers may be required for tightening bolts.
3. Hex Key/Allen Wrench: Check if any components require an Allen wrench for installation.
4. Cutting Tool (if necessary): In case any existing parts need trimming for a better fit.
5. Measuring Tape: To ensure accurate positioning of the bumper.
6. Marker/Pen: For marking drill points if required.

Installation Steps:

1. Preparation:

   • Gather all required tools and ensure a clean workspace.
   • Lay out all bumper components and install accessories.

2. Remove Existing Bumper:

   • Utilize the screwdriver and wrench to carefully detach the existing bumper from the RC crawler.

3. Position the New Bumper:

   • Align the metal rear bumper with the mounting points of your RC crawler chassis.
   • Use the measuring tape to ensure proper fit and orientation.

4. Secure the Bumper:

   • Attach the bumper using the provided screws and bolts.
   • Tighten all fasteners securely, making sure the bumper is stable and well-aligned.

5. Install the Spare Tire Holder:

   • Follow the included instructions to attach the spare tire holder to the bumper.
   • Ensure it is securely fastened to support the spare tire.

6. Install Lighting:

   • Connect the integrated lights to the power source according to the provided wiring instructions.
   • Ensure connections are secure to enable functionality.

7. Final Checks:

   • Double-check all connections and fastenings.
   • Test the light functionality before taking your RC crawler for a ride.

Note: Follow safety guidelines while using tools and ensure proper care is taken when handling equipment to prevent damage.

Once the installation is complete, your Metal Rear Bumper with Spare Tire Holder and Light is ready for use, enhancing your 1/10 scale RC crawler’s performance and functionality. Enjoy your adventures!