Sprocket Clutch Cover Installation Guide

Product Overview:
The Sprocket Clutch Cover with 3 Holes is designed for 49cc, 66cc, and 80cc 2-stroke engines, making it ideal for various motorized bicycle modifications. This durable cover enhances performance by improving power transmission efficiency while ensuring long-lasting usage in various environments. The lightweight structure reduces the overall weight of your bicycle, boosting maneuverability and performance.

Tools Required:
To install the Sprocket Clutch Cover, please prepare the following tools:

1. Socket Wrench Set
   Ensure you have a suitable size that fits the bolts on your engine cover.

2. Screwdriver Set
   A flat-head and Phillips screwdriver may be necessary for different screws.

3. Torque Wrench
   To ensure bolts are tightened to the manufacturer’s specifications.

4. Pliers
   Useful for gripping and removing any stubborn screws or components.

5. Rag or Clean Cloth
   To clean surfaces before installation.

6. Loctite Thread Sealant (optional)
   For added security on the screws, providing extra hold against vibrations.

Installation Steps:

1. Preparation:

   • Ensure the engine is off and cooled down.
   • Disconnect the ignition to prevent accidental starts during installation.

2. Remove Existing Cover (if applicable):

   • Use the socket wrench to remove any bolts holding the old cover in place.
   • Carefully take off the old cover, being mindful of any gaskets or seals.

3. Clean the Surface:

   • Use a rag to clean the engine surface where the new clutch cover will be placed.

4. Position the New Clutch Cover:

   • Align the Sprocket Clutch Cover with the engine mounting holes.
   • Ensure that the cover fits snugly in place.

5. Secure the Cover:

   • Insert the screws through the pre-drilled holes in the cover.
   • Use the socket wrench to tighten the bolts, ensuring they are securely fastened without over-tightening.

6. Final Check:

   • Ensure everything is aligned correctly and that no tools are left on or around the engine.
   • Reconnect the ignition.

7. Test Ride:

   • After installation, take a short test ride to ensure everything functions properly.

Important Note:

• Always consult your engine's manual for specific torque specifications and additional instructions if needed.

By following this guide, you will successfully install your Sprocket Clutch Cover, enhancing the performance of your motorized bicycle. Happy riding!