Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Chain saw accessories
replacement wheels
throttle pull wires
ignition coils
straw bags
mufflers
blade shaft adapters
hand-pull disc springs
etc.
US /en/
USD
Hello, Sign In
Account & Lists
Cart
oil pump with worm compatible withe CS350 CS260 CS270 CS271 CS280 CS320 CS351 CS355TCS2600 and T 3600 chainsaw 36cc replacement parts for chainsaw maintenance
96 Sold
USD 9.59USD9.87
97% Limited Time
About This Item
High-efficiency oil pump design, specially designed for E CS350, CS260, CS270, CS271, CS280, CS320, CS351, CS355T, CS2600 and T The 3600 model chain saw is built to ensure a good oil supply
Precise replacement of parts helps extend the service life of the chain saw and reduce maintenance frequency
Simple installation, even non-professional users can easily replace it to ensure the smooth operation of the chain saw
Passed Strictly tested to ensure compatibility and consistent performance with original parts
Enhance the cutting efficiency of the chain saw, optimize work performance, and help users complete various felling tasks.
Sold To
United States
USD 5.01
Delivery: 7-15 Business Days
Fast Delivery
Refund If Package Lost
Refund If Items Damaged
Refund If No Delivery in 30 Days
Quantity
1
Installation Instructions
Product Installation Instructions for Oil Pump with Worm Compatible with E CS350, CS260, CS270, CS271, CS280, CS320, CS351, CS355T, CS2600, and T 3600 Chainsaws
Tools Required:
- Screwdriver set (Philips and flathead)
2.Wrench set - Pliers
- Funnel (for oil filling)
- Clean cloth or rag (for cleaning spills)
- Safety gloves
- Safety goggles
Installation Steps:
-
Preparation:
- Ensure the chainsaw is turned off and disconnected from any power source.
- Wear safety gloves and goggles for protection.
- Place the chainsaw on a stable, flat surface.
-
Remove the Chainsaw Cover:
- Use the appropriate screwdriver to remove screws securing the chainsaw cover.
- Carefully lift and remove the cover to expose the oil pump area.
-
Remove the Old Oil Pump:
- Disconnect any hoses attached to the old oil pump.
- Use a wrench to unscrew any bolts holding the oil pump in place.
- Gently remove the old oil pump from its position.
-
Install the New Oil Pump:
- Position the new oil pump into the designated area.
- Reattach any hoses you previously disconnected.
- Use the wrench to securely fasten the oil pump with the bolts.
-
Reattach the Chainsaw Cover:
- Place the chainsaw cover back onto the chainsaw.
- Secure it with the screws you removed earlier.
-
Fill Oil Tank:
- Use a funnel to refill the oil tank with the appropriate chainsaw bar oil.
- Avoid overfilling; leave some space for air.
-
Test the Chainsaw:
- Reconnect any power source and start the chainsaw.
- Check for oil flow to ensure proper functionality of the new oil pump.
- Ensure there are no leaks around the new installation.
-
Clean Up:
- Wipe any spills with a clean cloth or rag.
- Store your tools in a safe place.
Note: If you encounter any issues during installation or if the oil pump does not function as expected, consult the user manual or contact customer support for assistance.
By following these steps, you can successfully install the oil pump and maintain the optimal performance of your chainsaw.
Description
Item: Oil Pump With Worm
Color: As shown in the picture
Quantity: 2 Pcs
Compatible with E CS350 CS260 CS270 CS271 CS280 CS320 CS351 CS355T CS2600 and T 3600 Chainsaw 36CC Parts.
TAG：
Chain saw accessories
replacement wheels
throttle pull wires
ignition coils
straw bags
mufflers
blade shaft adapters
hand-pull disc springs
etc.
Related Items
