Installation Instructions for Gas Fuel Tank for 50CC Children Dirt Bike Compatible with PW50, PEE-WEE, and PIWI 50 Models

Tools Required:

1. Adjustable Wrench or Socket Set
2. Screwdriver (Flathead and Phillips)
3. Fuel Line Clamp (if necessary)
4. Clean Rags or Paper Towels
5. Safety Goggles
6. Work Gloves

Installation Steps:

1. Preparation:

   • Ensure you have all the required tools on hand.
   • Work in a well-ventilated area to avoid inhaling fumes.
   • Wear safety goggles and gloves for protection.

2. Remove the Old Fuel Tank:

   • Safely drain any remaining fuel from the old tank.
   • Use a screwdriver to remove any screws or bolts securing the old fuel tank.
   • Disconnect the fuel lines carefully, using a fuel line clamp if necessary to prevent spills.

3. Clean the Area:

   • Wipe down the area where the fuel tank will be installed using clean rags or paper towels.
   • Ensure there are no debris or contaminants to avoid any issues later.

4. Install the New Fuel Tank:

   • Position the new fuel tank onto the mounting brackets or supports.
   • Secure the tank with the appropriate screws or bolts using an adjustable wrench or socket set.
   • Ensure that the tank is firmly in place and aligned correctly.

5. Connect the Fuel Lines:

   • Attach the fuel lines to the new tank, ensuring a snug fit to avoid leaks.
   • If necessary, use a fuel line clamp for added security.

6. Final Checks:

   • Double-check all connections to ensure they are tight and secure.
   • Refill the tank with fuel, taking care not to overfill.

7. Test the Installation:

   • Start the dirt bike to check for any fuel leaks around the connections.
   • Take a short test ride to ensure everything is functioning properly.

Conclusion:
By following these steps, you can successfully install the Gas Fuel Tank on your 50CC children dirt bike. Ensure that you maintain your bike regularly for optimal performance and safety.