Installation Instructions for Universal Kick Start Lever Pedal

Tools Required:

1. Adjustable Wrench - For loosening and tightening bolts.
2. Socket Set - To assist in removing and installing the kick start lever.
3. Screwdriver Set - Flathead and Phillips screwdrivers may be needed for various screws.
4. Torque Wrench - To ensure bolts are tightened to the manufacturer’s specifications.
5. Pliers - Useful for gripping and manipulating small components.
6. Safety Goggles - To protect your eyes during the installation process.
7. Work Gloves - To keep your hands safe and clean.

Installation Steps:

1. Preparation:

   • Ensure your motorcycle is on a stable and level surface.
   • Disconnect the battery to avoid any electrical issues during installation.

2. Remove the Old Kick Start Lever:

   • Use the adjustable wrench or socket set to loosen and remove the bolts securing the old kick start lever.
   • Carefully take off the old lever and set it aside.

3. Install the New Universal Kick Start Lever:

   • Align the new kick start lever with the mounting bracket according to the manufacturer’s specifications.
   • Insert the bolts through the lever and into the bracket.

4. Tighten the Bolts:

   • Using the torque wrench, tighten the bolts to the required specifications. Refer to your motorcycle’s manual for appropriate torque values.

5. Reinstall Any Removed Components:

   • If required, reattach any components you may have removed during the process.

6. Reconnect the Battery:

   • Safely reconnect the battery terminals.

7. Final Checks:

   • Ensure everything is secured properly and there are no loose parts.
   • Test the kick start lever to ensure smooth operation before taking your motorcycle for a ride.

Important Note:

Always refer to your motorcycle’s owner manual for specific instructions and torque specifications related to your model. If you’re uncertain about any steps, consult a professional mechanic for assistance.

Enjoy your enhanced riding experience with the new kick start lever!