Installation Instructions for Trimmer Coil Line Spool for 18-inch Brush Cutter (Model 244-014.0)

Compatibility:
This trimmer line spool is compatible with various brands of 18-inch brush cutters and lawn mowers.

Required Tools:

• No specialized tools are needed for installation.
• Optional: A pair of gloves for hand protection.

Installation Steps:

1. Preparation:

   • Ensure the brush cutter or lawn mower is turned off and disconnected from the power source.
   • If applicable, remove the old trimmer line spool from the trimmer head.

2. Open the Trimmer Head:

   • Locate the trimmer head and open it as per the user manual of your brush cutter or mower. This typically involves pressing tabs or unscrewing a cap.

3. Remove the Old Line:

   • Carefully remove any remaining old trimmer line. Dispose of it properly.

4. Insert New Line Spool:

   • Take the new Trimmer Coil Line Spool (Model 244-014.0) and place it into the trimmer head.
   • Ensure that it is positioned correctly according to the manufacturer's guidelines.

5. Thread the Cutting Wire (if required):

   • If your trimmer head requires the cutting wire to be threaded through a small opening, follow the manufacturer’s instructions for this step. Ensure the wire is wound correctly to allow for effective cutting.

6. Reassemble the Trimmer Head:

   • Once the spool is securely in place, reattach the trimmer head cover or cap. Make sure it clicks or screws in properly.

7. Final Check:

   • Before turning the trimmer back on, check to ensure everything is securely in place and that the cutting wire is correctly installed.

8. Ready to Use:

   • Reconnect the power source, and your trimmer is ready for use. Enjoy efficient and effective cutting!

Note: Always refer to your specific brush cutter or lawn mower's user manual for more detailed instructions and safety precautions.