Product Installation Instructions for Fuel Valve Replacement

Compatible Models:
This fuel valve is suitable for KA Transplanter SPW-48C, SPW-68C, and KA T420, ensuring a perfect match with your equipment.

Installation Tools Needed:
Before starting the installation, make sure you have the following tools ready:

1. Screwdriver (Flathead and Phillips)
2. Pliers
   3.Wrench set
   4.Clean cloth or rag
3. Safety gloves
4. Safety goggles

Installation Steps:

1. Prepare the Work Area:

   • Ensure you are working in a well-ventilated area.
   • Clear the workspace of any unnecessary items to avoid accidents.

2. Safety First:

   • Wear safety gloves and goggles to protect yourself from any fuel spills or sharp edges.

3. Disconnect the Fuel Supply:

   • Turn off the fuel tap and disconnect the fuel line from the old valve carefully.

4. Remove the Old Fuel Valve:

   • Use the appropriate wrench to loosen and remove any screws or bolts securing the old valve in place.
   • Carefully detach the old valve from the equipment.

5. Install the New Fuel Valve:

   • Position the new fuel valve in place, ensuring it aligns with any mounting holes.
   • Secure it using the screws or bolts you removed earlier.

6. Reconnect the Fuel Supply:

   • Carefully attach the fuel line to the new valve, ensuring a snug fit to prevent leaks.

7. Check for Proper Functionality:

   • Turn the fuel supply back on and check for any leaks around the new valve.
   • If no leaks are detected, start the engine to ensure stable operation.

8. Clean Up:

   • Wipe any spilled fuel with a clean cloth and safely dispose of any waste materials.
   • Store your tools properly.

By following these steps, you will successfully replace the fuel valve in your KA Transplanter or Motoculteur, enhancing fuel control and improving overall efficiency.