Product Installation Instructions for 36x48x11 Front Fork Oil Seal Dust Cover

Compatible with: RYZ 50 Enduro and MRT 50 Models

Required Tools:

1. Flathead screwdriver
2. Phillips screwdriver
3. Socket wrench set
4. Torque wrench
   5.Clean rag or cloth
5. Grease or lubricant
6. Pliers

Installation Steps:

1. Preparation

   • Ensure the motorcycle is on a stable and level surface.
   • Remove any accessories or components that may obstruct access to the front fork area.

2. Remove the Old Dust Cover

   • Use a flathead screwdriver to gently pry off the old dust cover.
   • If necessary, use pliers for extra leverage.
   • Clean the area surrounding the fork to remove dirt and debris.

3. Inspect Forks and Components

   • Check the fork and surrounding components for wear or damage.
   • Replace any worn parts as needed to ensure proper performance.

4. Install New Dust Cover

   • Apply a small amount of grease or lubricant to the new dust cover’s sealing edge.
   • Carefully slide the new dust cover onto the fork, ensuring it fits securely in place.

5. Reassemble Fork Components

   • Reattach any components previously removed, ensuring all screws and bolts are tightened to the manufacturer’s specified torque using a torque wrench.

6. Final Check

   • Inspect the newly installed dust cover for proper fitment.
   • Confirm that all components are securely fastened and there is no play in the fork.

7. Test Ride

   • Take the motorcycle for a short test ride to ensure everything is functioning smoothly.
   • Monitor for any unusual noises or performance issues.

Tips:

• Always wear protective gear when working on your motorcycle.
• If uncertain about any step, consult a professional mechanic for assistance.

By following these steps, you’ll have your new front fork oil seal dust cover installed efficiently, ensuring optimal performance and longevity for your motorcycle.