Product Installation Instructions for Air Filter Suitable for V Ciao Px Boss Boxer Bravo Ceao Grillo Si Moped

Tools Required:

1. Screwdriver (Philips or Flathead, depending on your moped model)
   2.Wrench or Socket Set
   3.Clean Cloth
2. Safety Gloves (optional)

Installation Steps:

1. Preparation:

   • Ensure that your moped is turned off and cool to the touch.
   • Wear safety gloves if desired for protection.

2. Access the Air Filter Compartment:

   • Use the screwdriver to remove any screws securing the air filter cover.
   • Carefully lift the cover to access the air filter compartment.

3. Remove the Old Air Filter:

   • Take note of how the old air filter is positioned for correct installation of the new one.
   • Gently pull out the old air filter. If there is any resistance, check for additional screws or clips.

4. Clean the Compartment:

   • Use the clean cloth to wipe down the air filter compartment, removing any dust or debris.

5. Install the New Air Filter:

   • Position the new air filter into the compartment, ensuring it fits snugly and is oriented correctly.
   • Press down gently to ensure it is securely in place.

6. Reattach the Air Filter Cover:

   • Place the air filter cover back over the compartment.
   • Use the screwdriver to secure the screws, ensuring the cover is tightly sealed.

7. Final Check:

   • Inspect the air filter installation to confirm everything is in place and properly secured.
   • Dispose of the old air filter according to local regulations.

8. Test the Moped:

   • Start your moped and allow it to run for a few minutes to ensure proper operation. Listen for any unusual noises.

Congratulations! You have successfully installed the new air filter. Regular maintenance of your air filter will help enhance the moped's performance and extend the engine's lifespan.