Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Preparation: Park your scooter on a flat surface and ensure it is turned off. Disconnect the battery for safety.
Remove Existing Speedometer: Using your screwdriver, remove screws or bolts securing the existing speedometer. Carefully take it out and disconnect any wiring.
Inspect the Area: Check for any damage or dirt in the area where the new speedometer will be installed. Clean as necessary.
Install the New Speedometer: Connect the wiring for the new drive gear speedometer following the manufacturer’s instructions. Secure it in place using the appropriate screws or bolts.
Check Alignment: Make sure the speedometer is aligned properly and does not obstruct any moving parts.
Secure Loose Cables: Use cable ties to organize and secure any loose cables, ensuring they do not interfere with the scooter’s operation.
Reconnect the Battery: Once everything is in place, reconnect the battery and turn on the scooter.
Test the Speedometer: Take your scooter for a short ride to ensure the speedometer is functioning correctly and measuring speed accurately.
Final Check: After testing, double-check all connections and screws to make sure everything is tight and secure.
Always refer to your scooter’s manual for specific instructions related to your model. If you encounter any issues during installation, consult a professional for assistance. Enjoy your enhanced riding experience with your new speedometer!