Product Installation Instructions for 3PCS 901XL Ink Cartridge

Tools Required:

1. New 901XL Ink Cartridges: Ensure you have the 3PCS 901XL ink cartridges ready for installation.
2. Soft Cloth or Paper Towel: To wipe off any ink spills or smudges during the installation process (optional but recommended).
3. Rubber Gloves (optional): To keep your hands clean if you prefer not to touch the cartridges directly.

Installation Steps:

1. Prepare Your Environment:

   • Find a clean, flat surface to work on.
   • Ensure your printer is turned on and ready for use.

2. Open the Printer:

   • Lift the printer lid to access the cartridge compartment.
   • Wait for the cartridge holder to center itself for easy access.

3. Remove Old Ink Cartridges:

   • Gently press down on the cartridge you wish to replace until it clicks and releases.
   • Pull the cartridge towards you to remove it from the printer.
   • Dispose of the old cartridge responsibly.

4. Unpack the New 901XL Ink Cartridges:

   • Remove the new ink cartridges from their packaging.
   • Take off the protective plastic covering from the nozzles without touching the copper contact points.

5. Install the New Cartridges:

   • Align the new cartridge with the slot, ensuring the copper contacts face the back of the printer.
   • Gently push the cartridge into the slot until you hear a click, indicating it’s securely in place.

6. Close the Printer:

   • Once all cartridges are installed, close the printer lid.
   • Wait for the printer to initialize and recognize the new cartridges.

7. Test the Printer:

   • Print a test page to ensure that the cartridges are installed correctly and functioning properly.

Note:

• Handle cartridges with care to avoid damage or ink spills.
• Store extra cartridges in a cool, dry place for optimal performance.

Your printer is now ready for high-quality printing with the 3PCS 901XL ink cartridges!