Product Installation Instructions for Kick Start Lever for 125cc 4 Stroke Motorbikes

Tools Required:

1. Socket Wrench Set – To remove and install the bolts securely.
2. Screwdriver Set – A flathead and Phillips screwdriver may be needed for various screws.
3. Pliers – Useful for gripping and manipulating components during installation.
4. Torque Wrench (optional) – To ensure bolts are tightened to the manufacturer’s recommended specifications.
5. Cleaning Cloth – To wipe any grease or dirt from the installation area.
6. Safety Gloves – To protect your hands during installation.

Installation Steps:

1. Preparation

   • Ensure the motorcycle is on a stable surface and securely supported.
   • Disconnect the battery for safety.

2. Remove the Old Kick Start Lever

   • Using the socket wrench, remove the bolts securing the old kick start lever.
   • Carefully detach the old lever from its mount.

3. Clean Installation Area

   • Wipe the area where the kick start lever is installed to remove any dust or grease.

4. Install the New Kick Start Lever

   • Position the new kick start lever onto the mount.
   • Secure it using the bolts you removed earlier. Tighten them with the socket wrench, ensuring a firm fit without overtightening.

5. Check Functionality

   • After installation, manually verify that the lever engages smoothly.
   • Reconnect the battery.

6. Test the Motorcycle

   • Start the motorcycle using the new kick start lever to ensure everything is functioning correctly.

Safety Tips:

• Always wear protective gear while performing maintenance on your motorcycle.
• Make sure the motorcycle is turned off during the installation process.

With these instructions, you should be able to install your new kick start lever with ease! Enjoy the enhanced performance and durability of your motorcycle.