Installation Guide for Scooter Air Filter

Product Information:

• Compatible with 125cc models, including Jet4, Orbit2, Fiddle II, and Super Duke
• Part Number: 17211M9Q0000, 17211GY69400

Tools Required:

• A screwdriver (preferably a Phillips head screwdriver)
• A pair of gloves (optional, but recommended to prevent oil and dirt from getting on your hands)
• A soft cloth or brush for cleaning the air filter housing
• A new air filter (the one that comes with the kit)

Step-by-Step Installation Instructions:

1. Prepare the area: Find a well-ventilated area to work in, and make sure the scooter is on a level surface.
2. Locate the air filter housing: Find the air filter housing on your scooter, usually located on the left or right side of the engine.
3. Remove the screws: Use a screwdriver to remove the screws holding the air filter housing in place. There may be 2-3 screws, depending on the scooter model.
4. Open the air filter housing: Gently pull the air filter housing away from the engine. You may need to wiggle it a bit to release it from its mounting clips.
5. Remove the old air filter: Carefully pull out the old air filter from the housing. Be careful not to touch the internal components of the housing.
6. Inspect and clean the housing: Use a soft cloth or brush to clean the air filter housing. Make sure it's free of dirt, dust, and debris.
7. Install the new air filter: Place the new air filter in the housing, making sure it's properly seated and aligned.
8. Reassemble the housing: Put the air filter housing back in place, and secure it with the screws you removed earlier.
9. Tighten the screws: Make sure the screws are tightened securely, but don't overtighten them.
10. Test the scooter: Start the engine and check for any unusual noises or performance issues.

Tips and Reminders:

• Regularly check and replace the air filter every 5,000 to 7,500 miles to maintain optimal performance and extend engine life.
• Make sure to dispose of the old air filter responsibly.
• If you're not comfortable with this installation, consider consulting a professional mechanic or the scooter's manufacturer for assistance.