Installation Instructions for Universal Electric Lock Charger

Required Tools:

• Phillips screwdriver (#2 or #3)
• Flathead screwdriver (for some models)
• Allen wrench (for some models)
• Torx screwdriver (for some models)
• Pliers (for some models)
• A soft cloth or rubber gloves (for handling the device and tools)

Step 1: Prepare the Device

1. Remove the protective covering from the device to expose the mounting screws.
2. Locate the mounting holes on the device and the motorcycle, e-bike, or scooter.
3. Align the device with the mounting holes and mark the screw positions.

Step 2: Mount the Device

1. Drill pilot holes for the screws, if necessary.
2. Insert the screws into the marked positions and tighten them firmly.
3. Use a level to ensure the device is properly aligned.

Step 3: Connect the Charger

1. Locate the charging port on the device and the corresponding port on the vehicle.
2. Connect the charger to the vehicle's charging port.
3. Secure the charger in place with a zip tie or cable management system.

Step 4: Install the Lock

1. Locate the lock mechanism on the device and attach it to a fixed point on the vehicle.
2. Use a key to lock and unlock the device as needed.

Step 5: Test the Device

1. Plug in the charger and verify that it is working properly.
2. Test the lock mechanism to ensure it is secure and functioning correctly.

By following these steps, you should be able to successfully install your Universal Electric Lock Charger for motorcycles, e-bikes, and scooters. If you encounter any issues or have questions, consult the user manual or contact customer support for assistance.