Installation Instructions for Marine Carburetor Compatible with 69M-14301 for F2.5 4-Stroke Portable Outboard Engine

Tools Required:

1. Screwdriver set (flathead and Phillips)
   2.Wrench set
2. Pliers
   4.Clean rag or cloth
3. Fuel line disconnect tool (if applicable)
4. Goggles and gloves (for safety)

Installation Steps:

1. Safety First: Before starting, ensure the engine is turned off and cooled down. Wear goggles and gloves for protection.

2. Prepare the Working Area: Clear the area around the outboard engine to have enough space to work. Place a clean rag underneath the engine to catch any fuel spills.

3. Disconnect the Fuel Supply: If applicable, use a fuel line disconnect tool to safely disconnect the fuel line from the engine.

4. Remove the Old Carburetor:

   • Locate the screws or bolts fastening the old carburetor to the engine.
   • Use the appropriate screwdriver or wrench to remove them.
   • Carefully detach the old carburetor and set it aside.

5. Prepare the New Marine Carburetor:

   • Inspect the new carburetor for any shipping damage.
   • Ensure that all gaskets and seals are intact.

6. Install the New Carburetor:

   • Align the new carburetor with the mounting points on the engine.
   • Secure it in place by tightening the screws or bolts hand-tight, then give an additional quarter turn with the wrench.

7. Reconnect the Fuel Supply: Reattach the fuel line to the new carburetor. Ensure it fits snugly to avoid leaks.

8. Check Connections: Make sure all connections are tight, and there are no loose parts.

9. Test the Engine:

   • Turn on the fuel supply and check for any leaks around the connections.
   • Start the engine and allow it to run for a few minutes to ensure smooth operation and check performance.

10. Clean Up: Once you’re satisfied with the installation, clean up the working area and safely dispose of any spills or waste materials.

Maintenance Tips:

• Regularly check the carburetor and connections for signs of wear or leaks.
• Keep the carburetor clean for optimal performance.

By following these steps, you can successfully install your Marine Carburetor and enjoy enhanced performance from your F2.5 4-Stroke Portable Outboard Engine.