Installation Instructions for Compatible Oil Filter for ATVs ACE 325 and Ranger 325 (2014-2017)

Tools Required:

1. Oil Filter Wrench: To remove the old oil filter and install the new one securely.
2. Socket Set: To remove the oil drain plug if necessary.
3. Drain Pan: To catch old oil during the change.
4. Rags or Shop Towels: For clean-up and to wipe off any spilled oil.
5. Funnel: To pour new oil into the engine easily.
6. Safety Gloves: To protect your hands from oil and debris.
7. Safety Glasses: For eye protection during the installation process.

Installation Steps:

1. Preparation:

   • Ensure your ATV is parked on a flat surface and the engine is turned off and cool to the touch.
   • Gather all necessary tools and materials, including the new oil filter and fresh oil.

2. Drain Old Oil:

   • Use the socket set to remove the oil drain plug and drain the old oil into the drain pan.
   • Allow the oil to fully drain before proceeding.

3. Remove Old Oil Filter:

   • Use the oil filter wrench to remove the old oil filter. Be cautious, as there may still be old oil inside.

4. Prepare the New Oil Filter:

   • Before installing the new oil filter, apply a small amount of new oil to the rubber gasket on the top of the filter. This helps create a better seal.

5. Install the New Oil Filter:

   • Screw the new oil filter onto the engine by hand. Make sure it’s snug but do not overtighten.

6. Replace Oil Drain Plug:

   • Once all the old oil has drained, replace the oil drain plug and tighten it securely.

7. Add New Oil:

   • Using the funnel, pour the new oil into the engine oil fill port. Refer to your owner’s manual for the correct amount and type of oil.

8. Check Oil Level:

   • After adding oil, wait a moment, then check the oil level using the dipstick. Add more oil if necessary.

9. Start the Engine:

   • Turn on the engine and let it run for a few minutes. Check for any leaks around the new oil filter and oil drain plug.

10. Clean Up:

    • Dispose of the old oil and oil filter properly according to local regulations. Clean any spills with rags or shop towels.

Conclusion:

Following these steps will ensure that your oil filter is successfully installed and that your ATV’s engine remains in optimal condition. Regular maintenance will help prolong the life of your vehicle and improve its performance.

Disclaimer: Always consult your vehicle's owner manual for specific instructions related to your model.