Gexpress Is a Startup Dedicated to You. Shop With Confidence—Refunds Are Easy Through !
Installation Instructions for Universal Oil Pump Assembly for 50cc 2 Stroke Scooters
Compatibility:
This oil pump assembly is compatible with various 50cc 2-stroke scooter models, ensuring wide applicability and providing users with more choices.
Preparation:
Before beginning the installation, ensure you have the following tools ready:
Screwdriver Set (Phillips and Flathead):
To remove and secure screws during installation.
Wrench Set:
To loosen and tighten nuts and bolts as necessary.
Pliers:
For gripping and manipulating components.
Fuel Line (optional):
In case you need to replace existing fuel lines.
Clean Rag:
To clean any spills and ensure that the installation area is tidy.
Safety Goggles and Gloves:
For personal protection during installation.
Installation Steps:
Preparation:
Ensure the scooter is parked on a flat surface, and turn off the ignition. Remove the seat or panel covering the oil pump area if necessary.
Remove the Old Oil Pump:
Use the screwdriver to unscrew any securing screws. Carefully disconnect any fuel lines attached to the old pump.
Install the New Oil Pump:
Position the new universal oil pump assembly in place. Ensure it aligns properly with the mounting points.
Connect Fuel Lines:
Attach the fuel lines to the new oil pump, ensuring a secure fit to avoid leaks.
Secure the Pump:
Use the screwdriver and wrench to secure the pump in place with screws and nuts.
Check Connections:
Double-check all connections and tighten any loose fittings to ensure everything is secure.
Test the Installation:
Once everything is installed, turn on the ignition and test the oil flow by starting the engine.
Clean Up:
Wipe away any spills and tidy up the installation area.
Tips:
By following these instructions, you can effectively install the Universal Oil Pump Assembly and enhance your scooter's performance. Enjoy your ride!