Product Installation Manual

Model: Motorcycle Air Intake Cleaner Compatible with FZ-07 MT-07 2014-2021 XSR700 2016-2021 XTZ690 for Tenere 700 2020-2021 700 and Tracer 2016-2020 MTT690

Tools Required:

1. Torx screwdriver (T20)
2. Socket wrench or ratchet
3. Pliers (optional)
4. Rubber gloves (optional)
5. Safety glasses (optional)

Installation Steps:

1. Remove the air intake duct: Use a Torx screwdriver to remove the screws that hold the air intake duct in place. Gently pull the duct away from the engine.
2. Disconnect the air filter housing: Use a socket wrench or ratchet to loosen the bolts that hold the air filter housing in place. Remove the housing and set it aside.
3. Remove the old air filter: Take out the old air filter from the housing and discard it.
4. Install the new air intake cleaner: Place the new air intake cleaner into the housing, ensuring it is properly seated.
5. Reconnect the air filter housing: Place the air filter housing back onto the engine and tighten the bolts securely using a socket wrench or ratchet.
6. Reattach the air intake duct: Place the air intake duct back onto the engine and secure it with the Torx screws you removed earlier.
7. Tighten all bolts and screws: Double-check that all bolts and screws are tightened securely.

Tips and Precautions:

• Make sure to handle the air intake cleaner with care, as it may be damaged by rough handling.
• Wear rubber gloves and safety glasses to protect yourself from any debris or dust that may be released during installation.
• If you are not comfortable with this installation, consider seeking the help of a professional mechanic.

Warranty Information:

This product is covered by a limited warranty. Please refer to the warranty card included with your purchase for details.