Installation Instructions for Engine Air Intake Filter Cleaner Compatible with 2014-2019 DL 1000 V-Strom Motorcycle

Tools You Will Need:

1. Socket Wrench Set: To remove any bolts or screws securing the air intake cover.
2. Screwdriver Set: Flathead and Phillips screwdrivers may be needed to access and remove components.
3. Clean Cloth: To wipe down surfaces and ensure a clean installation area.
4. Air Filter Cleaner Spray (optional): For cleaning the filter before installation, if applicable.
5. Gloves: To keep your hands clean and protect the filter from oils and dirt.

Installation Steps:

1. Preparation:

   • Make sure the motorcycle is turned off and is on a stable surface.
   • Wear gloves to maintain cleanliness and protect the new filter.

2. Accessing the Air Filter:

   • Use a socket wrench to remove the bolts or screws holding the air intake cover in place.
   • Carefully lift off the cover to reveal the air filter.

3. Removing the Old Air Filter:

   • Gently pull out the old air filter from its housing. Be cautious not to let any debris fall into the intake.

4. Cleaning the Area:

   • Use a clean cloth to wipe down the inside of the air intake and the surrounding area to remove any dust or debris.

5. Installing the New Air Filter:

   • If necessary, spray the air filter cleaner on the new filter and let it dry before installation.
   • Place the new air filter into the housing, ensuring it fits snugly and seals properly.

6. Reassembling:

   • Replace the air intake cover, ensuring it aligns correctly with the mounting points.
   • Use the socket wrench to secure the bolts or screws back into place.

7. Final Check:

   • Double-check that all parts are secured and the installation area is clean.
   • Start the motorcycle to ensure it runs smoothly with the new air filter.

Maintenance Tips:

• Periodically check the condition of the air filter and clean as necessary to maintain optimal engine performance.

Enjoy your upgraded ride with enhanced engine efficiency!