Product Installation Instructions for 10 Pack Exhaust Seal Gasket Suitable for 25cc 26cc 2500 2600 Handle Pruner

Tools Required:

1. Screwdriver (Phillips or flathead, depending on your pruner model)
2. Wrench or socket set (for removing screws or bolts)
   3.Clean rag or cloth
3. Safety gloves
4. Safety goggles

Installation Steps:

1. Preparation:

   • Ensure the pruner is turned off and completely cooled down.
   • Disconnect the spark plug wire to prevent accidental starting.

2. Remove the Old Exhaust Seal Gasket:

   • Use the appropriate screwdriver and/or wrench to remove the screws or bolts securing the exhaust cover.
   • Carefully take off the exhaust cover and remove the old seal gasket.
   • Clean the surface of the exhaust area where the gasket was located, using a clean rag to remove any debris or leftover material.

3. Install the New Exhaust Seal Gasket:

   • Take one of the new exhaust seal gaskets from the pack.
     -Align it properly with the mounting surface, ensuring a snug fit.
   • Reattach the exhaust cover by securing it with the screws or bolts previously removed.

4. Final Touches:

   • Reconnect the spark plug wire.
   • Ensure all parts are securely in place and check again for any loose connections.

5. Testing:

   • Start the pruner to ensure it operates smoothly without any exhaust gas leaks. Monitor for any irregular sounds or performance issues.

Note:

• It is advisable to replace the exhaust seal gasket regularly to maintain optimal engine performance and prevent gas leaks.
• Always wear safety gloves and goggles while working on power equipment to protect yourself.

Enjoy a seamless installation and improved performance with your handle pruner!