Product Installation Instructions for Fuel Tank Assembly (MIKA-SA MT72 RN EH12-2 4HP Tamping Rammer Jumping Jack Hammers)

Required Tools:

1. Wrench Set: A set of adjustable wrenches or socket wrenches to fit the nuts and bolts.
2. Screwdrivers: A flat-head screwdriver and a Phillips screwdriver for securing any screws.
3. Pliers: Needle-nose pliers may be helpful for gripping and maneuvering small parts.
4. Fuel Container: To safely transfer fuel into the new fuel tank once installed.
5. Safety Gloves: To protect your hands during installation.
6. Safety Goggles: To safeguard your eyes from any debris or fuel splashes.
7. Shop Towels: For cleaning any spills and keeping your work area tidy.

Installation Steps:

1. Preparation:

   • Make sure the tamping rammer is turned off and cool to the touch.
   • Disconnect any power source or battery as a precaution.

2. Remove Old Fuel Tank:

   • Using the appropriate size wrench, loosen and remove the bolts securing the old fuel tank to the equipment.
   • Carefully detach any fuel lines connected to the old tank, ensuring to catch any spilled fuel with shop towels.

3. Install New Fuel Tank:

   • Position the new fuel tank in place, ensuring it aligns with the mounting points.
   • Reconnect the fuel lines, securely tightening with pliers if necessary.
   • Use the wrench to tighten the bolts and secure the tank in place.

4. Refill with Fuel:

   • Using a clean fuel container, carefully refill the new fuel tank with the recommended type of fuel.

5. Final Check:

   • Inspect all connections to ensure they are tight and secure.
   • Check for any leaks by running the equipment for a few minutes and monitoring for any signs of fuel seepage.

6. Conclusion:

   • Once everything is rechecked, your tamping rammer is ready for operation.

Note: Always refer to the user manual for specific details and safety precautions related to your model. Enjoy your hassle-free installation!