Installation Instructions for Drone Accessories Replacement Camera Component for Mavic Mini/SE

Tools Required:

1. Small Phillips Screwdriver - For securing screws during the installation process.
2. Tweezers - To handle small components and screws with precision.
3. Cleaning Cloth - To clean the camera lens and components before installation.
4. Plastic Pry Tool - To gently detach the existing camera component without causing damage.

Installation Steps:

1. Prepare Your Workspace
   Ensure you have a clean, flat surface to work on. Gather all necessary tools and the replacement camera component.

2. Remove the Existing Camera Component

   • Use the plastic pry tool to gently detach the existing camera module from the drone.
   • Be cautious not to damage any surrounding components.
   • Use the small Phillips screwdriver to remove any screws holding the camera in place.

3. Clean the Area

   • Before installing the new component, use the cleaning cloth to remove any dust or debris from the camera area on the drone for optimal performance.

4. Install the New 3 in 1 Camera Component
   -Align the new camera component with the mounting area on the drone.

   • Gently push it into place until you hear a click, indicating it is secure.

5. Secure the Component

   • Use the small Phillips screwdriver to fasten any screws that may have come with the new component.
   • Make sure everything is snug but avoid over-tightening to prevent damage.

6. Final Checks

   • Inspect the installation to ensure that the camera module is securely attached and there are no loose parts.
   • Use tweezers to adjust any small components if necessary.

7. Test the Installation

   • Power on the drone and check the camera functionality.
   • Perform a short test flight to ensure stability and clarity of the footage.

Conclusion

Congratulations! You have successfully installed the Drone Accessories Replacement Camera Component for Mavic Mini/SE. Enjoy enhanced photography and filming capabilities with your newly upgraded drone.