Product Installation Instructions for Oil Tank Replacement - S MS180 MS170 MS180 170 018 017 Chainsaw

Tools Needed:

1. Screwdriver Set - A Phillips and flathead screwdriver are recommended for loosening and tightening screws.

2. Wrench Set - A set of wrenches may be required to remove any bolts or fasteners.

3. Pliers - Useful for gripping and holding small parts during installation.

4. Clean Cloth - To wipe any spills and keep the workspace clean.

5. Container for Oil - To catch any residual oil during the replacement process.

Installation Steps:

1. Preparation:

   • Ensure the chainsaw is turned off and disconnected from any power source.
   • Place the chainsaw on a stable, flat surface.

2. Remove the Old Oil Tank:

   • Use the screwdriver to remove the screws securing the existing oil tank.
   • Carefully detach the old oil tank from the chainsaw, being mindful of any residual oil.

3. Clean the Area:

   • Wipe down the area where the old oil tank was attached with a clean cloth to remove any debris or oil residue.

4. Install the New Oil Tank:

   • Position the new oil tank in place, aligning it with the necessary mounting points.
   • Secure it with the screws previously removed, using the screwdriver to tighten them.

5. Check for Leaks:

   • Before using the chainsaw, fill the new oil tank with oil and check for any leaks around the connection points.

6. Final Touches:

   • Ensure all screws and connections are secure before using the chainsaw.
   • Dispose of the old oil tank and any oil waste properly according to local regulations.

Maintenance Tips:

• Regularly check the oil tank for any signs of wear or damage.
• Keep the oil tank and surrounding areas clean to ensure optimal performance.
• Replace the oil tank as needed to maintain efficiency.

By following these instructions, you can easily replace the oil tank in your S MS180, MS170, MS180, 170, 018, or 017 chainsaw and enjoy hassle-free gardening and maintenance.