Product Installation Instructions for Drone Accessories Replacement Parts

Tools You Will Need:

1. Screwdriver Set: A set of small screwdrivers (both Phillips and flathead) to remove and install screws on your drone.

2. Pliers: Standard pliers may be needed to grip and hold small components during installation.

3. Tweezers: Helpful for handling small screws or parts that are difficult to reach.

4. Hex Wrench (if applicable): Depending on the specific model of the drone, a hex wrench may be necessary for loosening or tightening screws.

5. Clean Cloth: To clean the drone components before and after installation.

6. Work Surface: A flat, clean surface where you can safely work on your drone without risk of losing parts.

Installation Steps:

1. Preparation: Ensure that your drone is turned off and remove the battery to prevent any accidental activation during the installation.

2. Remove the Damaged Parts: Using the appropriate screwdriver, carefully remove the screws that hold the damaged arm and shaft in place. Keep these screws in a safe location for reuse.

3. Install the New Parts: Align the new front left/right arm and rear shaft with the mounting brackets. Securely fasten them in place using the original screws. Ensure that they are tight, but avoid overtightening to prevent damage.

4. Double-check Connections: Make sure that all connections are secure and that there are no loose parts before reassembling the drone.

5. Reassemble the Drone: Once all new components are installed, reattach any covers or additional parts that were removed during the disassembly.

6. Final Check: Inspect the installation to ensure everything looks correct. Clean the drone using the cloth to remove any dust or fingerprints.

7. Reconnect the Battery and Test Flight: Once you are confident that the installation is complete, reconnect the battery and perform a test flight in a safe, open area to check the functionality of the new parts.

By following these instructions, you will ensure a smooth installation of your drone's replacement parts for enhanced performance and extended lifespan.