Product Installation Instructions for LED Backlight Strips

Compatible Models:
-DLED55CNC

• ZX55ZC332M10A0A4
• ZX55ZC332M10A0V2-K600
• JL.D550A1330-114ES-M

Features:

• Uniform light distribution
• Soft brightness for comfortable visual experience
• Upgrade your TV backlight to enhance visual effects

Installation Tools Required:

1. Screwdriver - For any necessary screws or adjustments.
2. Scissors - To cut the LED strips to the desired length if needed.
3. Cleaning Cloth - To clean the surface where the strips will be applied.
4. Measuring Tape - To measure the length of the TV and ensure proper placement of the strips.
5. Adhesive Tape (if not included) - For additional securing of the strips if necessary.

Installation Steps:

1. Prepare the Surface: Clean the area on the back of the TV where the LED strips will be attached using the cleaning cloth.
2. Measure and Cut: Use the measuring tape to determine the length needed for the LED strips. Cut them if necessary.
3. Peel and Stick: Remove the backing from the adhesive tape on the LED strips and carefully stick them to the prepared surface.
4. Connect the Power: Ensure the LED strips are connected to the power source as per the manufacturer's instructions.
5. Test the Lights: Turn on the TV and check the LED backlight to ensure everything is working correctly.

By following these instructions, you can successfully install the LED backlight strips and enhance your viewing experience.