Product Installation Instructions for Universal Compatible Motorcycle Oil Filter

Compatibility:
This oil filter is designed to fit various motorcycle models, including CF500, CF550, U-Force, Z-Force 550, 650NK, 650TK, and 800 series.

Installation Steps:

1. Preparation
   Before starting the installation, ensure you have the following tools ready:

   • An oil filter wrench (if needed)
     -A socket wrench set
     -A drain pan
     -Clean rags or paper towels
   • Engine oil (for lubricating the rubber gasket)
   • Safety glasses

2. Drain Old Oil

   • Position the drain pan beneath the motorcycle’s oil pan.
   • Use a socket wrench to remove the oil drain plug and allow the old oil to fully drain into the pan.

3. Remove Old Oil Filter

   • Locate the old oil filter.
   • Use an oil filter wrench to loosen and carefully remove the old oil filter. Be cautious as any remaining oil may spill out.

4. Prepare New Oil Filter

   • Take the new oil filter and wipe the rubber gasket with a clean rag.
   • Apply a small amount of new engine oil to the rubber gasket to ensure a proper seal.

5. Install New Oil Filter

   • Screw the new oil filter onto the engine by hand, turning it until it's snug. Do not overtighten.

6. Reinstall Drain Plug

   • Once the old oil has drained completely, reinstall the oil drain plug and tighten it securely.

7. Add New Oil

   • Open the motorcycle’s oil fill cap, and pour in the recommended amount of new engine oil using a funnel if necessary.

8. Check for Leaks

   • Start the engine and let it run for a few minutes.
   • Turn off the engine and inspect around the oil filter and drain plug for any signs of leakage.

9. Dispose of Old Oil and Filter

   • Properly dispose of the old oil and oil filter according to local regulations.

Conclusion
Your new Universal Compatible Motorcycle Oil Filter is now installed! Enjoy the enhanced engine performance and protection it offers. Always remember to check oil levels regularly and change the filter as per the manufacturer's recommendations.