Installation Guide for Carburetor Kit for Various S and FS Series Trimmers Models 38, 45, 45C, 46, 55, 55R, 45L, 55RC, 55T, 75, 80, 85 FC, 55, 85 HT70, 75 SP85 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :

Tools Required:

• Torx screwdriver (for removing screws)
• Phillips screwdriver (for removing screws)
• Pliers (for gripping small parts)
• Wrench (for removing fuel line fittings)
• Socket wrench (for removing carburetor mounting bolts)
• Fuel line wrench (for removing fuel line fittings)
• Fuel filter wrench (for removing fuel filter)
• Needle-nose pliers (for reaching small areas)
• Rubber gloves (for protecting hands from fuel and oil spills)

Step-by-Step Installation Instructions:

1. Disconnect the fuel line from the carburetor: Use a fuel line wrench to loosen and remove the fuel line fitting from the carburetor.
2. Remove the carburetor mounting bolts: Use a socket wrench to remove the carburetor mounting bolts.
3. Remove the old carburetor: Carefully lift the old carburetor out of the trimmer.
4. Inspect and clean the area: Inspect the area where the new carburetor will be installed and clean it with a soft brush to remove any debris or dirt.
5. Install the new carburetor: Place the new carburetor into position and secure it with the mounting bolts. Tighten the bolts in a star pattern to avoid damag ing the threads.
6. Reconnect the fuel line: Use a fuel line wrench to tighten the fuel line fitting onto the new carburetor.
7. Replace the fuel filter: Use a fuel filter wrench to remove the old fuel filter and replace it with a new one.
8. Adjust the air/fuel mixture: Refer to the user manual for instructions on how to adjust the air/fuel mixture.
9. Test the trimmer: Start the trimmer and check for any issues with the carburetor.

Tips and Precautions:

• Always follow the manufacturer's instructions for installation and maintenance.
• Wear protective gear, such as gloves and safety glasses, when working with power tools and chemicals.
• Be careful not to damage any neary surfaces or objects while working with power tools.
• Dispose of any hazardous materials, such as old fuel and filters, responsible.

Warranty Information:

This product is covered by a limited warranty. For more information, please refer to the warranty document provided with the product or contact the manufacturer dict tly.

Note: This is a general guide and may not be applicable to all models or situations. Always refer to the user manual or manufacturer's instructions for specific in stallation instructions.