Product Installation Instructions for Fuel Strainer Compatible with R SU EY28, EY40, RGX3500, RGX5510, RGX5500 Generators

Tools Required:

1. Adjustable Wrench
2. Flathead Screwdriver
3. Towels or Rags (for cleanup)
4. Container (to catch any fuel spills)
5. Safety Glasses
   6.Gloves

Installation Steps:

1. Preparation:

   • Ensure the generator is turned off and cool.
   • Disconnect the fuel line from the generator.
   • Prepare a safe workspace by placing towels or rags around the installation area to catch any spills.

2. Remove the Old Fuel Strainer:

   • Use the adjustable wrench to carefully disconnect the old fuel strainer from the generator.
   • If necessary, use the flathead screwdriver to loosen any clamps or fittings attached to the fuel strainer.

3. Install the New Fuel Strainer:

   • Position the new fuel strainer in place, ensuring that it aligns properly with the fuel line connections.
   • Hand-tighten the connections first, and then secure them with the adjustable wrench. Ensure they are snug but do not over-tighten.

4. Reconnect the Fuel Line:

   • Reconnect the fuel line to the new fuel strainer. Use the adjustable wrench to ensure a secure connection.

5. Check for Leaks:

   • Before starting the generator, double-check all connections for tightness.
   • If desired, you can briefly turn on the fuel to check for leaks around the newly installed strainer.

6. Test the Generator:

   • Start the generator and let it run for a few minutes.
   • Observe the operation to ensure it runs smoothly without any leaks.

7. Clean Up:

   • Once installation is complete and the generator is running properly, clean the workspace to remove any spilled fuel or debris.

Maintenance Tips:

• Regularly check and replace the fuel strainer to ensure optimal performance and longevity of your generator.

Thank you for choosing our fuel strainer! Enjoy efficient operation of your generator.