Product Installation Instructions for Coil Compatible with B244, B246, B250, B251, B260, B261, B290, B290BX, B291, B291TNG, B267, B297, HG550, HG17, HG22, PH25, PH61, SBL251, and SBT25

Tools Required:

1. Screwdriver Set: A set of screwdrivers (Phillips and flathead) to remove and secure screws during installation.

2. Wrench or Pliers: To help with any nuts or bolts that may need tightening or removal.

3. Utility Knife or Scissors: For cutting through packaging and any securing ties.

4. Safety Gloves: To protect your hands during installation.

5. Flashlight: To ensure you have good visibility in case the installation area is poorly lit.

Installation Steps:

1. Preparation:

   • Before starting, make sure the power supply to the device is turned off to prevent any accidents.
   • Gather all tools listed above.

2. Remove the Old Coil:

   • Carefully use a screwdriver to remove screws or fasteners securing the old coil.
   • Gently pull the old coil out from its housing.

3. Install the New Coil:

   • Take the new coil from its packaging, ensuring it is free from any damage.
   • Align the new coil in the same position as the old one and carefully insert it into the housing.

4. Secure the New Coil:

   • Use the screwdriver to fasten screws or fasteners, ensuring the coil is securely in place.

5. Final Checks:

   • Double-check all connections and ensure everything is tight and secure.
   • Replace any covers or components that were removed during the process.

6. Restore Power:

   • Once everything is securely installed, turn the power supply back on to the device.

7. Test the Device:

   • Run the device to ensure the new coil is functioning properly and enhancing performance.

By following these instructions, you can efficiently install the coil and enjoy improved device functionality. If you encounter any issues, refer to the device’s user manual for additional guidance.