Product Installation Instructions for Oil Pump Assembly Compatible with Chainsaw Models 295, 600 EL, SM 2055 E, SM 2055 EF

Tools Required:

1. Screwdriver Set: Both flathead and Phillips screwdrivers.
2. Wrench Set: Adjustable wrench or socket set to remove nuts and bolts.
3. Pliers: For gripping and holding components.
4. Cleaning Cloth: To clean any spilled oil and debris.
5. Safety Gloves: To protect your hands during the installation process.
6. Safety Goggles: To protect your eyes from any debris.

Installation Steps:

1. Preparation:

   • Ensure the chainsaw is turned off and unplugged from any power source.
   • Clean the area around the oil pump to prevent contamination.

2. Remove the Old Oil Pump:

   • Use the screwdriver to remove any screws securing the oil pump.
   • Carefully disconnect the oil lines by loosening the clamps with pliers.
   • Remove the old oil pump and dispose of it properly.

3. Install the New Oil Pump:
   -Align the new oil pump with the mounting holes.

   • Secure it using the screws removed earlier. Tighten them with the screwdriver.
   • Reconnect the oil lines and ensure they are fastened tightly.

4. Final Checks:

   • Inspect the installation for any loose connections.
   • Clean up any spilled oil with a cleaning cloth.

5. Testing:

   • Once installed, test the chainsaw in a safe environment to ensure proper oil flow and performance.

Safety Precautions:

• Always wear safety gear while performing maintenance.
• Make sure the chainsaw is turned off and cooled down before starting the installation.

By following these instructions, you will successfully install the oil pump assembly and ensure optimal performance of your chainsaw.